For intensive use, tested over 3,000 manoeuvres a day, the hydraulic bollard Grizzly is extremely easy to maintain with the square shaped flange and the attractive design.
With its hydraulic technology Grizzly requires less digging for installation.
Technical characteristics
- 230 Vac 50 Hz supply voltage
- Opening time 5 seconds H: 600 mm and 6 seconds H: 800 mm
- Safety valve that reverses the direction if an obstacle is detected
- Bollard available also in the special safety version “SCT”, which in the event of a blackout keeps the cylinder up
- IP 67 protection level
- Working temperature from -15 °c to + 60 °c and -30 °c + 60 °c with “TERMON” integrated heating circuit
- Cylinder in RAL 7022 painted iron or stainless steel with cylinder thickness 6 to 10 mm Ø 273 mm
- External control unit module CDS able to manage up to 4 bollards
- Automatic hand-maneuver in the event of a blackout except the “SCT” version
- For intensive use – 3,000 maneuvers a day
- High break in resistance.
This heavy duty product is developed for the protection and defence of sensitive and/or strategic sites such as prestigious buildings, hotels etc. K12 rated in accordance to ASTM2656:2007 M50 including PAS68:2010 7500/80/ N3 AND IWA14-1:2013 V/7200[N3C]/80/90. Each bollard can be fitted with a 100mm wide reflective strip and is available in blue grey (RAL 7031). Designed for lowering functionality after impact. This bollard has Interfaces for remote control.
Technical characteristics
- Independent hydraulic pump for each bollard: in case of pump failure, the other
bollards keep working - Easy access to hydraulic pump for simplified servicing, with anti-tampering switch
- Easy removal of bollard tube and hydraulic ram
- Impact resistance: up to 2 100 000 J (estimated)
- Standard rising time: ≤ 5.3 s @ 25 °C ambient temperature
- Emergency rising time: ≤ 2.5 s (with additional device EFO, option)
- Lowering time: 4.0 s typical, (factory adjusted, on-field adjustable)
- Max operating frequency: up to 2 000 op./day
- MCBF: 3 000 000 cycles
- Sensors for bollard positions: fully up and fully retracted
- Obstacle sensing, adjustable (with/without movement inversion)
- Bollard top cover with LED ligths and buzzer
- IP Grade: IP67
- EFO device for “Emergency” rising time (option)
- Bollard will stay up even in case of power loss. It is possible to lower the bollard by
means of a mechanical key
This heavy duty product is developed for the protection and defence of sensitive and/or strategic sites such as prestigious buildings, hotels etc. K4 rated in accordance to PAS68:2010 7500/50/N2, including ASTM2656:2007 M30 and IWA14-1:2013 Blocker V/7200[N2A]/48/90. Each bollard can be fitted with a 100mm wide reflective strip and is available in blue grey (RAL 7031). Comes with easy access to hydraulic pump for simplified servicing, protected with anti-tampering switch sensor (option)
Technical characteristics
- Independent hydraulic pump for each bollard: in case of pump failure, the other
bollards keep working - Impact resistance: up to 730 000 J (calculated)
- Standard rise time: ≤ 7.0 s
- Lowering time: typ 4.0 s
- Max operating frequency: up to 2 000 op./day
- MCBF: 3 000 000 cycles
- Obstacle sensing, configurable (with/without movement inversion)
- Bollard top cover with LED ligths and buzzer
- Interfaces for remote control (CDS-K)
- IP Grade: IP67
- Available in two versions:
- Standard: bollard will open in case of power loss
- Security SCT: bollard will stay up even in case of power loss. It is possible to lower the bollard by means of a security mechanical key.
SCUDO-G, operated by gas springs, are born with the purpose of road access controlling at a good price and with an extremely simple. Are operated by specific keys already used throughout Europe in public offices. It changes by pressing a foot and stops automatically as it goes. Due to its size and appearance the same, you can pair with mixed installations to cover large managed just steps from bumps electric and gas. These models are available in painted stem colour grey RAL 7002, with H:100 mm light reflectant paper or stainless steel AISI 304 stem.
Technical characteristics
- SCUDO-G, operated by gas springs for controlling road access
- Very easy to fit
- Operated by specific keys, already used throughout Europe in public offices
- changes by pressing a foot and stops automatically as it goes
- Due to its size and appearance the same, can be paired with mixed installations to cover large managed just steps from bumps electric and gas.
- Models available in painted stem colour grey RAL 7002, with H:100 mm light reflectant paper or stainless steel AISI 304 stem.
- Break in resistance upto 400,000 Joule.
